I`m no expert how ever this is what I`ve learned in the last couple of months all by trial and error.

The most important thing I can tell you is DON`T EVER GIVE UP NO MATTER WHAT! Good luck and may the Matrix light your way to an amazing kit-bash! :tfgrin

Very informative- I thankee.

I'm going to pwn you all when I finally build my Dodge Ram SRT 10 Ironhide! :mwahaha :mwahaha

One more thing! If you need to switch out the wheels cut the old ones off and pull the nail straight out. Then if the new wheels stick out just cut the axels down to where you need them. Like I did on Rodimus. Now to give credit where it is due big thanks to Viagra Prime for the 411 on how to remove the wheels.

One more thing! If you need to switch out the wheels cut the old ones off and pull the nail straight out. Then if the new wheels stick out just cut the axels down to where you need them. Like I did on Rodimus. Now to give credit where it is due big thanks to Viagra Prime for the 411 on how to remove the wheels.

u talkin about on alts pull th elil rivet out and replace it with new one and rim?

Actually if you pullit straight out you shouldn`t need to replace it but yes you will need to replace the rim.

Also I actually replaced the pins with the brass screws that I got with some really small hinges at Walmart. I bought those hinges for under the hood and for the bed cap to open up.

Cool guide, might come in handy now that i've started my first custom alternator. Got one question though...was planning on using styrene to help out with mine, but i'm not sure where to get it. Woulda walmart have it, or would i havta check out a hobby store of some kind?

Also I actually replaced the pins with the brass screws that I got with some really small hinges at Walmart. I bought those hinges for under the hood and for the bed cap to open up.

Please elaborate. I need some hinges but don't where/what to get.