Jump to content

Hasbro Primus Extra Unveiled.


tentagil

Recommended Posts

I agree.

 

HBS-02 may have already had the mold created and is also a guaranteed seller. The Dodge Ram is probably a bit too much of a risk at the moment as it is an unknown car in Japan (essentially) coupled with the funny shoulders (which I would suspect are the way they are due to Hasbros demand on building things down to a cost)

I thought they should have replicated the mold details from Laser Prime's shoulders onto those weird shoulder bits - that would have been cooler.

Link to comment
Share on other sites

  • Replies 213
  • Created
  • Last Reply
I agree.

 

HBS-02 may have already had the mold created and is also a guaranteed seller. The Dodge Ram is probably a bit too much of a risk at the moment as it is an unknown car in Japan (essentially) coupled with the funny shoulders (which I would suspect are the way they are due to Hasbros demand on building things down to a cost)

I thought they should have replicated the mold details from Laser Prime's shoulders onto those weird shoulder bits - that would have been cooler.

 

Yeah, I suspect that there was some funky peice of engineering on the shoulders at one point that was dropped for cost reasons, they are just weird as they are now.

Link to comment
Share on other sites

It just looks like people were expecting some extra Transformer to come with Primes, and if you thought that, then I don't know what to say other then you have expectations that are way too high.  I knew it would be something cool and small, and I don't watch Gf or Cybertron so I'm glad it's not some stupid thing from the show, it's Unicron's friggin head! It's awesome.  Some people are too hard to please.  

 

Starscream Starscream Starscream.  just be happy you are getting something cool.

That might make sense... If Galaxy Force was indeed a stupid show. As it isn't you really don't have much to stand on.

 

Oh well, I'll be getting Primus some day. If I get Unicron's head I get it and if I don't, I don't. It really doesn't concern me.

 

Anyway, I'd rather Noah would be released seperately... and transform  :redface

 

 

I guess when I'm twenty or so, Hasbro will start releasing things I want.

I'd say don't count on it, but heck, I'm wrong all the time. :tflaugh

 

But a transforming noah would rock...  Al four space shies, amd maybe little figures of all the humans, or coby's rumble.... :schin

Link to comment
Share on other sites

Let's all just agree to disagree. It is a cool accessory for people buying Primus, but, not enough for everyone to change their mind.

 

Otherwise, I think it's pretty neat. The young collectors will be satisfied with the big cool toy and the Unicron head, while the older collectors will like a toy of THE Primus, and a GREAT homage to G1 Unicron's restorage.

Link to comment
Share on other sites

I'm honestly happy its not the Noah.  Its in the series for maybe two episodes and thats it.  And honestly its not that cool looking IMHO.  Its a long shaft with a ring at one end and a little gold spike looking thing on the other.  And its bigger then Primus himself, which is jsut ridiculous.

 

The Unicron Head I like, if it had been Cybertron's moons that would have been cool, but the Noah just doesn't seem worth it to me.  but then I'm looking at Primus not as a Cybertron or Galaxy Force figure but as the TF home world and creator.  I don't care which series he's from, as far as I'm concerend he's part of all of them.

Link to comment
Share on other sites

*likes the Primus figure*

 

*likes the unicron head*

 

*likes the cheaper non-import pricetag*

 

*likes being able to drive up to the store and buy it*

 

*doesn't feel screwed*

 

 

:pfx

 

That head though is rofflicious.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Find Transformers on Ebay


  • Posts

    • Crankcase is hilarious. It's so awful and awesome at the same time. The entire front of the vehicle comes off, turns sideways, has a little piece flip around and becomes a gun. Ever since we first seen pictures of him I was wondering what they were doing with the front of his vehicle/chest. I never would've expected that though. It sure is a different design choice that's for sure. I can't wait for the upgrade kit to give him his shoulder cannons. I wonder how those will be implemented. I hope at least better than SS86 Jazz's shoulder cannon. Dead End is what it is still. Nothing to really talk about. I still don't like how Hasbro makes the lower legs longer than the upper legs for Transformers constantly though. Many of their designs would work better with longer upper legs like Dead End. Pointblank looks good. I understand the hate some have but I don't have that same hate. I just hate the Targetmaster still. We just had better ones that they're still using. Did it really cost that much to add one in at this point? Sure it's double the parts count and isn't gangmolded but still, it's not like Pointblank himself is all that complicated to begin with and the Battlemasters have long since made their money back with using those molds. They could've moved him into a wave with reissues or slight retools to eat some of the cost for that wave too instead of having it a wave with major retools and new molds entirely. Again, I can't wait to see the upgrade kit to give him that engine block spoiler gun thing to finish off the center rear of the vehicle mode. Hopefully they'll remember to put a 5mm port in the middle of it for a Targetmaster. Yeah Peacemaker already fills that spot but we all know that someone is going to make that piece to fit there. Skullgrin looks good but I don't like it as Skullgrin. I still think the original Generations Skullgrin is better overall. I do like all the weapons on this new one though. I'm just a little confused about what the vehicle mode is really supposed to be. It has treads in the back but nothing in the front. Is it a tank? Is it a half-track? Is it a hover tank? What is it? That head is awesome though and beats the older head by quite a bit. Transmetal II Megatron. Transmetal II Megatron. Wow. I just hope that the dragon neck/upper chest area is mistransformed. Or that something can be done. That was very much a bad choice if that's indeed all it can be. I can't wait to have to tighten up all those ball joints to get everything just like I want. Cryotek is the obvious redeco but I want one more other than him. I seen a digibash of him as RiD 2001 Megatron/Gigatron and while it looks good, I don't want that. I'd much rather have this redone as Beast Wars II Galvatron. It's not like the drill tank was all that much better than TMII Megatron's dragster so it's easy to leave out. Once you take out the drill tank, the dragons don't look too dissimilar to each other at that point. Yeah Galvatron didn't have a dragon arm but I'll take what I can get when it comes to a new toy for him.
    • Just listed on the Amazon Germany are some new leaked listing for the Transformers Legacy Wave 3 figures with official images. Check out the latest stock shots showing the figure modes and packaging and some product information for Transmetal II Megatron, Pointblank, Crank Case, Skullgrin, and Dead End in the gallery that follows. Click Image to Read the Full News Story Now
    • Transformers fans always try to avoid the extra bits and pieces that just inconveniently hang off the bots we know and love. Many in the fandom call this "kibble". As such, and voted on by fans, this is the top ten transformers with the worst kibble!  
    • Just up on Youtube, PrimeVsPrime shares his latest in-hand look at the Transformers Studio Series 15th Anniversary Autobots 5 Pack Amazon exclusive set. Check out the full set with comparisons with the original Studio Series releases for SS-32 Optimus Prime, SS-14 Ironhide, SS-04 Ratchet, SS-49 Bumblebee, and SS-09 Jazz figures. Click Image to Read the Full News Story Now
×
  • Create New...
Sign Up For The TNI Newsletter And Have The News Delivered To You!


Entertainment News International (ENI) is the #1 popular culture network for adult fans all around the world.
Get the scoop on all the popular comics, games, movies, toys, and more every day!

Contact and Support

Advertising | Submit News | Contact ENI | Privacy Policy

©Entertainment News International - All images, trademarks, logos, video, brands and images used on this website are registered trademarks of their respective companies and owners. All Rights Reserved. Data has been shared for news reporting purposes only. All content sourced by fans, online websites, and or other fan community sources. Entertainment News International is not responsible for reporting errors, inaccuracies, omissions, and or other liablities related to news shared here. We do our best to keep tabs on infringements. If some of your content was shared by accident. Contact us about any infringements right away - CLICK HERE