If you need a bigger bike, the roadbot series has some bigger bikes on the way. Not sure how they'd work but its an idea

 

JL

try RiD axer for groove. should work just fine.

ok, well i am leaning towards evac, just because I have plans for bulkhead.

I looked into RID prime, but mudflap just seemed to work toooo, well. I wouldnt even have to repaint him. I was going to use the ladder from prime however.

 

and from what i rememebr sidewyas was a rather large bike for a deluxe. I should have him anyday now

I looked into RID prime, but mudflap just seemed to work toooo, well. I wouldnt even have to repaint him. I was going to use the ladder from prime however.

 

I might be off, but Mudflap looks a little small compaired to the other molds you are using. Shouldn't the central character be the largest. I believe RiD Prime may fit your group better as far as size is concerned. But what do I know...

ok, well i am leaning towards evac, just because I have plans for bulkhead.

I looked into RID prime, but mudflap just seemed to work toooo, well. I wouldnt even have to repaint him. I was going to use the ladder from prime however.

 

and from what i rememebr sidewyas was a rather large bike for a deluxe. I should have him anyday now

That works. Evac seems a little more in scale with the others. I forgot that 3/4 of Bulkhead is removable to leave 1/4 as the TF itself :tftongue

 

Think Mudflap would do fine. You are right on Sideways, he is pretty darn big for a moto character.

Someone wll yell at me for this, but don't commt to using every one of the G1 names - some are kinda silly.

 

Hot Spot should be INFERNO

Blades should be... just BLADE

Steetwise can be...I'm working on this one

Groove... anything else

whatever the other one is.

try RiD axer for groove. should work just fine.

 

I Agree 100%. This one would work PERFECT!

 

http://www.seibertron.com/toys/gallery.php...e=0&start=0

Someone wll yell at me for this, but don't commt to using every one of the G1 names - some are kinda silly.

 

Hot Spot should be INFERNO

Blades should be... just BLADE

Steetwise can be...I'm working on this one

Groove... anything else

whatever the other one is.

well, inferno is a seperate character and a helicopter has more than one rotor blade...

I looked into RID prime, but mudflap just seemed to work toooo, well. I wouldnt even have to repaint him. I was going to use the ladder from prime however.

 

I might be off, but Mudflap looks a little small compaired to the other molds you are using. Shouldn't the central character be the largest. I believe RiD Prime may fit your group better as far as size is concerned. But what do I know...

 

well i am not planning on making a bot-parts only. the biceps and thighs will most likely be cybertron primus or starscream. just like ptitvites devastator. I so mudflap only needs to be the base body. which is enough.

working on a sketch, should be done tonight

Cool thread Alphamagnus. You're definitely on the right track. One day I hope to attempt the same project. My personal votes are:

 

Groove = armada Sideways(should fit fine with a 'cheated' built up Defensor foot)

blades= cybertron evac (no contest)

Hotspot = RID Prime (my persional pref for scale and detail)

Firstaid = Alt Skids - I've tested this for proportion with Sideways and it's possible to make it work

Streetwise = Alt Prowl - same thing relating to Evac - but these Alt inclusions assume RID Prime as the torso.

 

Either way, I can't wait to see the sketch and progress pics. Good luck!