yeah but they could make shockwave (from the titanium figure they had designed and prototyes of) Soundwave (we need a G1 with articulation) The insecticons, ANy of the decepticon combiners, Blitzwing.... There are plenty of Decepticons they have to make still, and they realy are concentrating too much on the Autobots IMO

 

Give us some decepticon love

 

 

Decepticon love you say?! We have already seen or are in the process of seeing every Seeker and an additional repaint as well as three triple changers. Well, two I guess if you don't count Straxus/Darkmount. But, Onslaught has been done and I am sure that somewhere in the works someone is trying to figure out Swindle based on Hound.

 

 

The only reason for all the Autobots is because every time they do one, they have to do the additional characters with whom the mold can be used. I would suspect that since the Prowl mold, the Sideswipe mold, the Ironhide mold, the Inferno mold have been used to the fullest extent that we will most likely begin to see more Decepticons. Because I cannot think of very many more Autobots who shared the same molds. Trailbreaker and Grapple are about the only ones left on the Autobot side of things with that respect. Unless they decide to do a Stepper based on Jazz(unlikely but someone at Hasbro is reading this crap). Which only leaves us with Skids and Wheeljack on the Autobot side of things both are 1 off molds unless they use them for a Decepticon or Botcon exclusive. I'm sure there is someone we are missing and that's just the standard basic cars.

 

That said, there are a bunch more Autobots we still need to see. Kup, Springer, Arcee, Sandstorm, Broadside(and this figure better be a Voyager!) I know the list goes on and on. But like I said earlier, the Autobots typically out-botted the Decepticons 2-1 in the beginning. It wasn't until the Headmaster/Targetmaster series that it was closer to being a 1-1 ratio. With some discrepancies along the way.

yeah but they could make shockwave (from the titanium figure they had designed and prototyes of) Soundwave (we need a G1 with articulation) The insecticons, ANy of the decepticon combiners, Blitzwing.... There are plenty of Decepticons they have to make still, and they realy are concentrating too much on the Autobots IMO

 

Give us some decepticon love

 

 

Decepticon love you say?! We have already seen or are in the process of seeing every Seeker and an additional repaint as well as three triple changers. Well, two I guess if you don't count Straxus/Darkmount. But, Onslaught has been done and I am sure that somewhere in the works someone is trying to figure out Swindle based on Hound.

 

 

The only reason for all the Autobots is because every time they do one, they have to do the additional characters with whom the mold can be used. I would suspect that since the Prowl mold, the Sideswipe mold, the Ironhide mold, the Inferno mold have been used to the fullest extent that we will most likely begin to see more Decepticons. Because I cannot think of very many more Autobots who shared the same molds. Trailbreaker and Grapple are about the only ones left on the Autobot side of things with that respect. Unless they decide to do a Stepper based on Jazz(unlikely but someone at Hasbro is reading this crap). Which only leaves us with Skids and Wheeljack on the Autobot side of things both are 1 off molds unless they use them for a Decepticon or Botcon exclusive. I'm sure there is someone we are missing and that's just the standard basic cars.

 

That said, there are a bunch more Autobots we still need to see. Kup, Springer, Arcee, Sandstorm, Broadside(and this figure better be a Voyager!) I know the list goes on and on. But like I said earlier, the Autobots typically out-botted the Decepticons 2-1 in the beginning. It wasn't until the Headmaster/Targetmaster series that it was closer to being a 1-1 ratio. With some discrepancies along the way.

 

Wheeljack could be re-deco'd as: Marlboro / Diaclone Wheeljack, Slicer (G1 Action Master Decepticon redeco of AM Wheeljack), or work out an Energon Downshift deco. Skids could be re-deco'd as Robots in Disguise X-Brawn / Wild Ride(maybe?), G1 Movie Skids (green deco), or Screech(red deco)

Hoist, Trailbreaker can share a mold

Hopefully we can get a Stepper aka Ricochet out of the Jazz mold

leaving Skids and Wheeljack.

 

For the Decepticons, I am sure Hasbro will release a Thundercracker. Don't know why Hasbro hasn't released him since they do have the trademark

 

Word Mark THUNDERCRACKER Goods and Services IC 028. US 022 023 038 050. G & S: Toy action figures, toy vehicles and toy robots convertible into other visual forms. FIRST USE: 20020502. FIRST USE IN COMMERCE: 20020502 Mark Drawing Code (1) TYPED DRAWING Serial Number 76359075 Filing Date January 16, 2002 Current Filing Basis 1A Original Filing Basis 1B Published for Opposition July 16, 2002 Registration Number 2716511 Registration Date May 13, 2003 Owner (REGISTRANT) HASBRO, INC. CORPORATION RHODE ISLAND 1027 Newport Avenue Pawtucket RHODE ISLAND 02862 Attorney of Record Kurt R. Benson Type of Mark TRADEMARK Register PRINCIPAL Affidavit Text SECT 15. SECT 8 (6-YR). Live/Dead Indicator LIVE

 

 

Maybe we will see him next year also?

I know this doesn't really count, but I found an Inferno Bayverse Transformer Stealth Force today at TRU.

Does that mean we'll see this mold? It would actually be pretty cool if we do. It also showed his face on the packaging, which looked rather nice. Grapple and Inferno would be welcome to see if they used that head mold I saw.

Hoist, Trailbreaker can share a mold

Hopefully we can get a Stepper aka Ricochet out of the Jazz mold

leaving Skids and Wheeljack.

 

For the Decepticons, I am sure Hasbro will release a Thundercracker. Don't know why Hasbro hasn't released him since they do have the trademark

 

Word Mark THUNDERCRACKER Goods and Services IC 028. US 022 023 038 050. G & S: Toy action figures, toy vehicles and toy robots convertible into other visual forms. FIRST USE: 20020502. FIRST USE IN COMMERCE: 20020502 Mark Drawing Code (1) TYPED DRAWING Serial Number 76359075 Filing Date January 16, 2002 Current Filing Basis 1A Original Filing Basis 1B Published for Opposition July 16, 2002 Registration Number 2716511 Registration Date May 13, 2003 Owner (REGISTRANT) HASBRO, INC. CORPORATION RHODE ISLAND 1027 Newport Avenue Pawtucket RHODE ISLAND 02862 Attorney of Record Kurt R. Benson Type of Mark TRADEMARK Register PRINCIPAL Affidavit Text SECT 15. SECT 8 (6-YR). Live/Dead Indicator LIVE

 

 

Maybe we will see him next year also?

Hasbro would rework Sandstorm into Springer.I'm sure they will make Skidz/Mudflap.Voyager Broadside is a hot idea but a repaint seems unlikely.If Blitzwing is considered my request is that the deluxe tank era end to make way for a Voyager.Legends Trailbreaker(cutter) is a good sign of an upcoming deluxe, Hoist would eventually follow (hopefully sooner than later Prowl/Silverstreak style). Based on Hasbro reasoning Jazz would get the Bayformer repaint. I'd be happy with a Wheeljack repaint for the Sunstreaker mold ,again Hasbro reasoning would count this as an single used(?) mold since its a reworked Sideswipe. Still wish they would release Thundercracker/Skywarp( that Magnus two-set doesn't count). Something needs to happen with Magnus as well, redoing the Animated version would be great . Re-releasing the Classics Magnus with a sanctioned FP trailer would be ideal. Kup seems likely and Arcee as well. :beer

Damnit, I cant believe Generations is over already. You suck Hasbro. When I go into a store, I look exclusively for that red packaging and skip everything in yellow (except for voyager). You make me very sad.

 

I hope they'll keep packaging figures in robot mode as well.

Damnit, I cant believe Generations is over already. You suck Hasbro. When I go into a store, I look exclusively for that red packaging and skip everything in yellow (except for voyager). You make me very sad.

 

I hope they'll keep packaging figures in robot mode as well.

 

Generations is not over over, I'm just curious as to why they are combining the 2 lines. makes no sense. they are completely different. So I'll have to take care of that as I buy them

Wonder if we'll ever see a Huffer figure. I hate the Botcon one, too expensive...