Jump to content

zoso1900

Members
  • Posts

    10
  • Joined

  • Last visited

About zoso1900

Previous Fields

  • Country
    United States
  • Favorite Music
    Queens of the Stone Age
  • Favorite Movies
    Fight Club
  • Favorite TV Shows
    Breaking Bad
  • Favorite Books
    Fear and Loathing

zoso1900's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Update! Follow Bennington Bots on Facebook! So here is an update with pics. Things that changed in Version 2: Cannon is larger dia. all joints are tighter. Turret connection adjusted to be tighter legs are feet completely redesigned ankle tilt and heel support added details enhanced Made a few more adjustments this weekend and order placed, should be the last round of test parts before production starts.
  2. Back with my latest upgrade kit. This time I produced a major redesign for FP/ROTF Brawl. This upgrade kit includes a proper turret, new head, new tank treads that will turn into his arms and feet (no more duck feet) and also eliminates the back kibble. I worked on the design for a few months and it went through multiple ideas and lots of retooling to get everything to workout the way I wanted. The core body and legs are from the original figure, everything else will be new parts. There will be screws and pins needed to hold everything together. These are the first round of test parts and I'm super happy with the way everything turned out. I am going to adjust a few parts, make some walls thicker and adjust clearance but that is just standard procedure. As of right now this will not be available on my shapeways shop but will be cast in resin and sold directly through me, more info will come once I have the design worked out. Please note, shapeways only sent me one elbow. Take a look and let me know what you guys think.
  3. Wreck N Rule! Add-on kit to turn Generations Warpath into the Wrecker Impactor. The kit includes a shoulder cannon, hand gun, harpoon to replace his current hand and a head with three different faces. It has been tested using WSF. The shoulder cannon can be used in the location of the firing Warpath missile, the stock screw is used to hold the cannon in place. The chest will take the place of Warpaths cannon and includes the mounting piece needed to attach to Warpath. For the Harpoon, it comes with three different attachments, a long and short harpoon and also a drill attachment. They use a 3mm clip so they can be used on other figures as well. The harpoon attachments have to be removed during transformation. The head is 2 pieces that features three faces that can interchanged. The Warpath figure still transforms without any problems. Please leave comments and feedback. Hope you Enjoy! Impactor Kit Ver 1 w/ Head update Impactor Kit Ver 2 w/o Head update Impactor Head only Please checkout my Shapeways Shop for my other designs! Bennington Bots
  4. This head is to turn Transformers Prime RID Knockout mold into Jazz. It has been tested using WSF. It comes it two versions, a smirk and a stern face. Because of production of the ball joint is slightly loose but can be easily fixed with a little nail polish or paint. Please leave comments and feedback. Hope you Enjoy! TF Prime Jazz Ver. 1 TF Prime Jazz Ver. 2 Please checkout my Shapeways Shop for my other designs! Bennington Bots
  5. *Update* Version two of everything is ready to go. For the head I used two base models with slight variations which gives me a total of 8 different versions. I think this is a good way to give everyone something that fits their needs. Both of the base models have been tested using FUD. The ball joint was a little loose do to production but it was easily fixed with some clear nail polish. With the test shot one of the horns broke off at some point, I doubled the thickness of the horns so they should be a stronger. I have also found out that during transformation it works best to rotate the head around and tilt it forward slightly, this will ensure that the head will not be in bind when in car mode. (I would like to thank Neekotron for his help with the design of the second head.) The pipes and spoiler are now on ball joints to make them integrated with the transformation. The pipes and spoiler have been tested using WST and is the recommended material. The pipes are held on using clips that slide on the lip at the bottom of the door/arm. The ball joint for the pipes can be a little loose but will hold in place without a problem. With them being on a ball joint it makes it so they can be angled to fill in some of the space between the pipes and door. The spoiler sits a little high in car mode but gives good clearance in bot mode. It plugs into the location of the current, smaller stock spoiler. It is tight without the placement of screws but the mount has holes to allow the reuses the stock screws that are used with the stock spoiler. Now that everything is reworked I will try my hand at painting, this should prove to be interesting. Thanks for looking and please leave suggestions and comments. Everything can be found in my Shapeways shop. http://www.shapeways...lleryViewList=0
  6. This head is to turn Transformers Prime RID Bumblebee into GoldBug. It has been tested using FUD. Because of production of the ball joint is slightly loose but can be easily fixed with a little nail polish or paint. I am going to make this head fit a few other Bumblebees as well, DOTM, WFC and PE prime. Once these are done I'll update this page. Please leave comments and feedback. Hope you Enjoy! Transformers Prime RID Goldbug
  7. Here is my upgrade kit to turn the Transformers Prime Wheeljack mold into Transformers Prime Hot Rod! *Update* Version two of everything is ready to go. For the head I used two base models with slight variations which gives me a total of 8 different versions. I think this is a good way to give everyone something that fits their needs. Both of the base models have been tested using FUD. The ball joint was a little loose do to production but it was easily fixed with some clear nail polish. With the test shot one of the horns broke off at some point, I doubled the thickness of the horns so they should be a stronger. I have also found out that during transformation it works best to rotate the head around and tilt it forward slightly, this will ensure that the head will not be in bind when in car mode. (I would like to thank Neekotron for his help with the design of the second head.) The pipes and spoiler are now on ball joints to make them integrated with the transformation. The pipes and spoiler have been tested using WST and is the recommended material. The pipes are held on using clips that slide on the lip at the bottom of the door/arm. The ball joint for the pipes can be a little loose but will hold in place without a problem. With them being on a ball joint it makes it so they can be angled to fill in some of the space between the pipes and door. The spoiler sits a little high in car mode but gives good clearance in bot mode. It plugs into the location of the current, smaller stock spoiler. It is tight without the placement of screws but the mount has holes to allow the reuses the stock screws that are used with the stock spoiler. Now that everything is reworked I will try my hand at painting, this should prove to be interesting. Thanks for looking and please leave suggestions and comments. Everything can be found in my Shapeways shop. http://www.shapeways...lleryViewList=0
  8. Yes, it can be found here.... Hot Shop Gun Thanks everyone!
  9. When I think of Hot Spot the first thing that comes to mind is a blue firetruck with a ladder. Sadly GDO Hot Spot was missing said ladder. I decided that with the help of Shapeways I can add that classic G1 Hot Spot look to GDO Hot Spot. The upgrade includes an extendable ladder that measures about 12". There is an add on piece that will turn the existing gun into a handheld gun with a 5mm handle. The last piece is the attachment that is used for both the ladder and gun to attach it to Hot Spots arm. The ladder can store on his back in bot mode using existing holes located on his back. And in alt mode you can have either the ladder or gun on his back. Please comment and let me know what you think. For those interested the set can be purchased at the link below. http://www.shapeways.com/shops/benbots Thanks for looking!
  10. Here are my Shapeway Prime Soundwave Tentacles. They are made from segments and are fully flexible and poseable. When completely straight they are right at 6" long. Let me know what you think. Thanks for your looking. I am still in the process of painting and will update when completed. Thanks for look and please comment. For those interested you can order here... Shapeways Shop Edit: Link fixed
×
  • Create New...
Sign Up For The TNI Newsletter And Have The News Delivered To You!


Entertainment News International (ENI) is the #1 popular culture network for adult fans all around the world.
Get the scoop on all the popular comics, games, movies, toys, and more every day!

Contact and Support

Advertising | Submit News | Contact ENI | Privacy Policy

©Entertainment News International - All images, trademarks, logos, video, brands and images used on this website are registered trademarks of their respective companies and owners. All Rights Reserved. Data has been shared for news reporting purposes only. All content sourced by fans, online websites, and or other fan community sources. Entertainment News International is not responsible for reporting errors, inaccuracies, omissions, and or other liablities related to news shared here. We do our best to keep tabs on infringements. If some of your content was shared by accident. Contact us about any infringements right away - CLICK HERE