Where do you find this pen? I've looked but I can't find it.

Cybertron Snarl could sure use it  :thumb

<{POST_SNAPBACK}>

 

 

:pfx

hear, hear!

Where do you find this pen? I've looked but I can't find it.

<{POST_SNAPBACK}>

 

You could probably just use a really fine sharpie to do the panel line work, or goto any nearby office store and pick up an assortment of different sizes from .01 to .07, just like mechanical pencils.  But if you must have the gundam brand you should check this link:

 

http://www.hlj.com/product/GNZGM01

 

I have a number of Gundam Marker Paint Pens and am very pleased with them, but for whatever reason i never had the urge to plop down the money for their brand name panel line pens because i can just get those anywhere.  Anywas hope that helps.

I didn't alter the grey, I think its mostly just the panel lines bringing the details out.

 

I was torn whether or not to go over the 'con logo, but eventually decided to, making it look as though the entire wing was weathered, as apposed to the logo being magically clean compared to the rest of the wing.

 

I used a Sakura Micron Pen, I found it in the Scrapbooking section of Michael's.  If you don't have one of those around you, try just a craft store. 

Or an office shop. When I was doing detailing work, I used to find mine at an office place called Sav-On, that were in with the drafting supplies.

 

Aoi

I think the line detailing works best on the torso and the null rays. But it detracts from the wings and legs IMO.

I tried using a fine point sharpie but it didn't go on so well. I'll check an office store and see if they have a finer points. Which one works the best?

I tried using a fine point sharpie but it didn't go on so well. I'll check an office store and see if they have a finer points. Which one works the best?

<{POST_SNAPBACK}>

 

The finest one i have is .01.  According to sidewys post i guess he used a .05 pen to panel line Screamer? But i might be wrong since i dont have the figure myself so i can't confirm that.  As for what size you need, if it's not .05 you might want to look into buying a small set like i found at the my nearby office max that has 4 detail pens in following sizes .01, .03, .05. .07.  It should fit somewhere in line with one of those.

I tried using a fine point sharpie but it didn't go on so well. I'll check an office store and see if they have a finer points. Which one works the best?

<{POST_SNAPBACK}>

 

The finest one i have is .01.  According to sidewys post i guess he used a .05 pen to panel line Screamer? But i might be wrong since i dont have the figure myself so i can't confirm that.  As for what size you need, if it's not .05 you might want to look into buying a small set like i found at the my nearby office max that has 4 detail pens in following sizes .01, .03, .05. .07.  It should fit somewhere in line with one of those.

<{POST_SNAPBACK}>

thanks for the info. :thumb

I tried using a fine point sharpie but it didn't go on so well. I'll check an office store and see if they have a finer points. Which one works the best?

<{POST_SNAPBACK}>

 

The finest one i have is .01.  According to sidewys post i guess he used a .05 pen to panel line Screamer? But i might be wrong since i dont have the figure myself so i can't confirm that.  As for what size you need, if it's not .05 you might want to look into buying a small set like i found at the my nearby office max that has 4 detail pens in following sizes .01, .03, .05. .07.  It should fit somewhere in line with one of those.

<{POST_SNAPBACK}>

 

Appreciate the info too, all I could find when I was buying the individual pens was .03 or .02(and I think the .02 size was a total fluke.)

 

Aoi