Jump to content

The Action Pose Thread


THE STIG

Recommended Posts

ironhidefistsoffuryat8.png

 

"I just wanted to show him my cannons."

 

:D

 

(My Ironhide guide got a bit delayed by my job search, but it is coming!)

 

~Matt Booker

Edited by Matt Booker
Link to comment
Share on other sites

ironhidefistsoffuryat8.png

 

"I just wanted to show him my cannons."

 

:D

 

(My Ironhide guide got a bit delayed by my job search, but it is coming!)

 

~Matt Booker

 

I'm guessing the other Ironhide you got is going to be Ratchet. To be honest I'll probably get another Ironhide just to paint him into Ratchet myself just in case the rumors about a U.S. release of Ratchet are false. I mean we found out about Ironhide, and Silverstreak at the same time but the only one of the 2 we have definite confirmation of being repainted for U.S. release is Silverstreak into Smokescreen. Kind of wish we got Ratchet first though the blade side of the gun makes more sense for him.

Link to comment
Share on other sites

Two cannons! Nice! :thumb

 

Thanks! :D It's been a while since I watched the movie, so I had to look up Ironhide's quote.

 

I'm guessing the other Ironhide you got is going to be Ratchet. To be honest I'll probably get another Ironhide just to paint him into Ratchet myself just in case the rumors about a U.S. release of Ratchet are false. I mean we found out about Ironhide, and Silverstreak at the same time but the only one of the 2 we have definite confirmation of being repainted for U.S. release is Silverstreak into Smokescreen. Kind of wish we got Ratchet first though the blade side of the gun makes more sense for him.

 

No, I'm still scared of painting. :emo

 

Why I got him is kind of complicated, but there are two main reasons.

 

1, A popular mod for him is to carve the central gray piece so it doesn't hit against the bumper. This lets you slide the hips forward more. In addition, you're supposed to carve the top of the crotch piece so the bumper has more clearance.

 

That didn't solve the issue, and carving the top of the crotch doesn't do much because it leaves the hips higher and they hit the bumper then.

 

So I figured out a way to mod the backpack, which lets it swing around and securely clip where I think it was intended to when designed.

 

This lets you slide the hips all the way forward and his head is then flush with the top of the body.

 

That creates ANOTHER problem. His stature was no longer humanesque, and therefore displeasing to the eye.

 

I've posted about this before (with pictures), but basically it causes his head to sit far back while his hips are far forward and his arms are in the middle.

H

.A

..L

 

So to correct that, you can lean him forward a little. That lines everything up, but causes his head to look down.

 

So I added a ball joint to the head, and moved his hips back a bit so he lines up better.

 

So he still had a carved crotch issue, and I suspected that I didn't even need to carve the middle piece.

 

I found and Ironhide today and took the lower half from it and put it on the upper half of my modded Ironhide. It fits! And now there's not a huge hole in his middle when you look at it from the side.

 

So no carving of the middle piece is needed at all. (If you put his head on a ball joint, it's perfect. If you don't, and still want the hips all the way forward so the head is up that last little bit, only a small amount of carving to the middle piece is needed.)

 

That's lengthy to explain, and if it's not clear I apologize. In a week or so I'll have a guide prepared, and within it you'll find all the different options for display and how to mod him to be that way.

 

~Matt Booker

Edited by Matt Booker
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Find Transformers on Ebay


  • Posts

    • Crankcase is hilarious. It's so awful and awesome at the same time. The entire front of the vehicle comes off, turns sideways, has a little piece flip around and becomes a gun. Ever since we first seen pictures of him I was wondering what they were doing with the front of his vehicle/chest. I never would've expected that though. It sure is a different design choice that's for sure. I can't wait for the upgrade kit to give him his shoulder cannons. I wonder how those will be implemented. I hope at least better than SS86 Jazz's shoulder cannon. Dead End is what it is still. Nothing to really talk about. I still don't like how Hasbro makes the lower legs longer than the upper legs for Transformers constantly though. Many of their designs would work better with longer upper legs like Dead End. Pointblank looks good. I understand the hate some have but I don't have that same hate. I just hate the Targetmaster still. We just had better ones that they're still using. Did it really cost that much to add one in at this point? Sure it's double the parts count and isn't gangmolded but still, it's not like Pointblank himself is all that complicated to begin with and the Battlemasters have long since made their money back with using those molds. They could've moved him into a wave with reissues or slight retools to eat some of the cost for that wave too instead of having it a wave with major retools and new molds entirely. Again, I can't wait to see the upgrade kit to give him that engine block spoiler gun thing to finish off the center rear of the vehicle mode. Hopefully they'll remember to put a 5mm port in the middle of it for a Targetmaster. Yeah Peacemaker already fills that spot but we all know that someone is going to make that piece to fit there. Skullgrin looks good but I don't like it as Skullgrin. I still think the original Generations Skullgrin is better overall. I do like all the weapons on this new one though. I'm just a little confused about what the vehicle mode is really supposed to be. It has treads in the back but nothing in the front. Is it a tank? Is it a half-track? Is it a hover tank? What is it? That head is awesome though and beats the older head by quite a bit. Transmetal II Megatron. Transmetal II Megatron. Wow. I just hope that the dragon neck/upper chest area is mistransformed. Or that something can be done. That was very much a bad choice if that's indeed all it can be. I can't wait to have to tighten up all those ball joints to get everything just like I want. Cryotek is the obvious redeco but I want one more other than him. I seen a digibash of him as RiD 2001 Megatron/Gigatron and while it looks good, I don't want that. I'd much rather have this redone as Beast Wars II Galvatron. It's not like the drill tank was all that much better than TMII Megatron's dragster so it's easy to leave out. Once you take out the drill tank, the dragons don't look too dissimilar to each other at that point. Yeah Galvatron didn't have a dragon arm but I'll take what I can get when it comes to a new toy for him.
    • Just listed on the Amazon Germany are some new leaked listing for the Transformers Legacy Wave 3 figures with official images. Check out the latest stock shots showing the figure modes and packaging and some product information for Transmetal II Megatron, Pointblank, Crank Case, Skullgrin, and Dead End in the gallery that follows. Click Image to Read the Full News Story Now
    • Transformers fans always try to avoid the extra bits and pieces that just inconveniently hang off the bots we know and love. Many in the fandom call this "kibble". As such, and voted on by fans, this is the top ten transformers with the worst kibble!  
    • Just up on Youtube, PrimeVsPrime shares his latest in-hand look at the Transformers Studio Series 15th Anniversary Autobots 5 Pack Amazon exclusive set. Check out the full set with comparisons with the original Studio Series releases for SS-32 Optimus Prime, SS-14 Ironhide, SS-04 Ratchet, SS-49 Bumblebee, and SS-09 Jazz figures. Click Image to Read the Full News Story Now
×
  • Create New...
Sign Up For The TNI Newsletter And Have The News Delivered To You!


Entertainment News International (ENI) is the #1 popular culture network for adult fans all around the world.
Get the scoop on all the popular comics, games, movies, toys, and more every day!

Contact and Support

Advertising | Submit News | Contact ENI | Privacy Policy

©Entertainment News International - All images, trademarks, logos, video, brands and images used on this website are registered trademarks of their respective companies and owners. All Rights Reserved. Data has been shared for news reporting purposes only. All content sourced by fans, online websites, and or other fan community sources. Entertainment News International is not responsible for reporting errors, inaccuracies, omissions, and or other liablities related to news shared here. We do our best to keep tabs on infringements. If some of your content was shared by accident. Contact us about any infringements right away - CLICK HERE