Jump to content

Recommended Posts

I've gotten the prototypes in and fixed whatever issues I found with them so wave 1 of my MiniBots line is now available on Shapeways: https://www.shapeways.com/model/1652341/minibot-wave-1.html


1800269_727381010628919_1376808609_n.jpg


Wave 1 consists of the following figures:




Load Bearer has a tendency to get lost in the details of things and can get quite compulsive when it comes to following the letter of a law. Rarely spotted outside of his Magnum armor, few even realize that this diminutive bot exists!


Load Bearer stands at about 2 1/4 inches tall (57mm) and has a 3mm grip to hold most weapons designed for smaller hands. Many of his parts are designed to be compatible with Hasbro's Kreon line of building toys, though he does not retain any ability to actually attach to any building bricks. Full assembly instructions for this figure can be found here, on our Facebook page. You can also click here to check out the figure in 3D.

1458504_674898469210507_698873360_n.png

1467356_682247261808961_1470898520_n.jpg




The Magnum armor set attaches to the Load Bearer minifigure creating an all new, much larger figure. The joints for the minifigure as well as the larger figure are intentionally quite tight. If you have trouble getting them together some light sanding should help. Also make certain that you remove ALL excess support material using a thin sharp instrument such as a pin or needle. More detailed assembly instructions are available here: page 1 and page 2. You can also view the assembled figure in 3D by clicking here.

1522527_695377683829252_1371605203_o.png

76869_708743899159297_1584327698_n.jpg





Uber Magnum has a tendency to get lost in the details of things and can get quite compulsive when it comes to following the letter of a law and views most of his ship mates as trouble makers. There are other times when he just can't deal with things right now.


Uber Magnum stands at about 4 1/2 inches tall (57mm) and has a 3mm grip to hold most weapons for smaller hands


The joints for the figure are intentionally quite tight. If you have trouble getting them together some light sanding should help. Also make certain that you remove ALL excess support material using a thin sharp instrument such as a pin or needle. More detailed assembly instructions are coming soon.

1535574_705075849526102_1418728637_n.png

1654376_720304388003248_1994142010_n.jpg






Disposal is a bit nieve and tends to lie a bit about his past in hopes of fitting in with his friends. Sometimes it feels as though he just slept through the last several million years.


Disposal stands at about 2 1/4 inches tall (57mm) and has a 3mm grip to hold most weapons designed for smaller hands. Many of his parts are designed to be compatible with Hasbro's Kreon line of building toys, though he does not retain any ability to actually attach to any building bricks. You can also click here to check out the figure in 3D.

1497077_712058122161208_9012651_n.png

1604610_724429790924041_189833630_n.jpg





Explorer is full of energy and having a great time checking out the universe with his crew mates on board the Wandering Beacon starship. Bad luck seems to follow him but he doesn't let it get him down and always tries to keep a positive outlook on things.


Explorer stands at about 2 1/4 inches tall (57mm) and has a 3mm grip to hold most weapons designed for smaller hands. Many of his parts are designed to be compatible with Hasbro's Kreon line of building toys, though he does not retain any ability to actually attach to any building bricks. You can also click here to check out the figure in 3D.

1048888_719098674790486_1562234255_o.png







It's often been said that if you want every bot on the Wandering Beacon starship to know something then tell Bartender it's a secret. He means well and he's always so full of energy but he's definitely one of those "small doses" sort of bots.


Bartender stands at about 2 1/4 inches tall (57mm) and has a 3mm grip to hold most weapons designed for smaller hands. Many of his parts are designed to be compatible with Hasbro's Kreon line of building toys, though he does not retain any ability to actually attach to any building bricks. You can also click here to check out the figure in 3D.



Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
  • Create New...
Sign Up For The TNI Newsletter And Have The News Delivered To You!


Entertainment News International (ENI) is the #1 popular culture network for adult fans all around the world.
Get the scoop on all the popular comics, games, movies, toys, and more every day!

Contact and Support

Advertising | Submit News | Contact ENI | Privacy Policy

©Entertainment News International - All images, trademarks, logos, video, brands and images used on this website are registered trademarks of their respective companies and owners. All Rights Reserved. Data has been shared for news reporting purposes only. All content sourced by fans, online websites, and or other fan community sources. Entertainment News International is not responsible for reporting errors, inaccuracies, omissions, and or other liablities related to news shared here. We do our best to keep tabs on infringements. If some of your content was shared by accident. Contact us about any infringements right away - CLICK HERE