Jump to content

Target Master Roller


Wu Long Ti
 Share

Recommended Posts

This is a legends scale roller to go with your legends scale Optimus Prime toy. Optimus may not come with a trailer but that doesn't mean he can't have his little buddy with him. More than companionship, Roller now gives Optimus additional fire power when needed.

 

This roller comes with plug in wheels and has a 3mm port on the top to accommodate any cyberverse/legends scale weapons. Roller can transform from vehicle mode to gun mode by flipping out his cannons and flipping down the rear section. Roller's included gun can be used by any of your cyberverse/legends figures as well as plug into his top port. Plugging the gun into the underside of the port adds the handle for Roller's gun mode. When plugged in one way the handle has a 3mm peg for smaller figures but when plugged in the other way it provides a 5mm peg for your larger deluxes or voyager figures. This little guy would work well with your Kreon collection too.

 

Target Master Roller by wulongti on Shapeways

 

424516_529993850367637_557064438_n.png

 

735107_529993887034300_977050030_n.png

 

150956_529993890367633_1882440713_n.png

 

485967_529993857034303_162554250_n.png

 

774672_529993853700970_948629333_o.png

Link to comment
Share on other sites

Kick A$ work Wu.

Thanks man, now I need to test the thing to make sure it works as planned :)

 

 

This looks better than that other one that was announced recently.

There was another one announced? I'll have to see if I can find any info on it.

 

 

:agree Freakin' Awesome!

Thanks dude :D

 

Edit: Found the article with the artwork of the Optimus holding what may or may not be a targetmaster Roller. Hard to tell. Hopefully the US Toyfair will shed more light on the subject.

 

I highly suspect that my version will be much smaller though lol

 

Now to see if I can get a bot mode out of this lol

 

 

Edited by Wu Long Ti
Link to comment
Share on other sites

Here it is:

http://www.transformertoys.co.uk/transformers/news/story/transformers+toy+news/new+transformers+generations+optimus+prime+with+targetmaster+roller+coming+soon%3F/11855

 

Apparently it is just a drawing that appeared in a Hasbro document or something. But just so you know, when I type in Targetmaster Roller into Google, your Shapeways page is the first result. :D

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Find Transformers on Ebay

  • Posts

    • Crankcase is hilarious. It's so awful and awesome at the same time. The entire front of the vehicle comes off, turns sideways, has a little piece flip around and becomes a gun. Ever since we first seen pictures of him I was wondering what they were doing with the front of his vehicle/chest. I never would've expected that though. It sure is a different design choice that's for sure. I can't wait for the upgrade kit to give him his shoulder cannons. I wonder how those will be implemented. I hope at least better than SS86 Jazz's shoulder cannon. Dead End is what it is still. Nothing to really talk about. I still don't like how Hasbro makes the lower legs longer than the upper legs for Transformers constantly though. Many of their designs would work better with longer upper legs like Dead End. Pointblank looks good. I understand the hate some have but I don't have that same hate. I just hate the Targetmaster still. We just had better ones that they're still using. Did it really cost that much to add one in at this point? Sure it's double the parts count and isn't gangmolded but still, it's not like Pointblank himself is all that complicated to begin with and the Battlemasters have long since made their money back with using those molds. They could've moved him into a wave with reissues or slight retools to eat some of the cost for that wave too instead of having it a wave with major retools and new molds entirely. Again, I can't wait to see the upgrade kit to give him that engine block spoiler gun thing to finish off the center rear of the vehicle mode. Hopefully they'll remember to put a 5mm port in the middle of it for a Targetmaster. Yeah Peacemaker already fills that spot but we all know that someone is going to make that piece to fit there. Skullgrin looks good but I don't like it as Skullgrin. I still think the original Generations Skullgrin is better overall. I do like all the weapons on this new one though. I'm just a little confused about what the vehicle mode is really supposed to be. It has treads in the back but nothing in the front. Is it a tank? Is it a half-track? Is it a hover tank? What is it? That head is awesome though and beats the older head by quite a bit. Transmetal II Megatron. Transmetal II Megatron. Wow. I just hope that the dragon neck/upper chest area is mistransformed. Or that something can be done. That was very much a bad choice if that's indeed all it can be. I can't wait to have to tighten up all those ball joints to get everything just like I want. Cryotek is the obvious redeco but I want one more other than him. I seen a digibash of him as RiD 2001 Megatron/Gigatron and while it looks good, I don't want that. I'd much rather have this redone as Beast Wars II Galvatron. It's not like the drill tank was all that much better than TMII Megatron's dragster so it's easy to leave out. Once you take out the drill tank, the dragons don't look too dissimilar to each other at that point. Yeah Galvatron didn't have a dragon arm but I'll take what I can get when it comes to a new toy for him.
    • Just listed on the Amazon Germany are some new leaked listing for the Transformers Legacy Wave 3 figures with official images. Check out the latest stock shots showing the figure modes and packaging and some product information for Transmetal II Megatron, Pointblank, Crank Case, Skullgrin, and Dead End in the gallery that follows. Click Image to Read the Full News Story Now
    • Transformers fans always try to avoid the extra bits and pieces that just inconveniently hang off the bots we know and love. Many in the fandom call this "kibble". As such, and voted on by fans, this is the top ten transformers with the worst kibble!  
    • Just up on Youtube, PrimeVsPrime shares his latest in-hand look at the Transformers Studio Series 15th Anniversary Autobots 5 Pack Amazon exclusive set. Check out the full set with comparisons with the original Studio Series releases for SS-32 Optimus Prime, SS-14 Ironhide, SS-04 Ratchet, SS-49 Bumblebee, and SS-09 Jazz figures. Click Image to Read the Full News Story Now
×
  • Create New...
Sign Up For The TNI Newsletter And Have The News Delivered To You!


Entertainment News International (ENI) is the #1 popular culture network for adult fans all around the world.
Get the scoop on all the popular comics, games, movies, toys, and more every day!

Contact and Support

Advertising | Submit News | Contact ENI | Privacy Policy

©Entertainment News International - All images, trademarks, logos, video, brands and images used on this website are registered trademarks of their respective companies and owners. All Rights Reserved. Data has been shared for news reporting purposes only. All content sourced by fans, online websites, and or other fan community sources. Entertainment News International is not responsible for reporting errors, inaccuracies, omissions, and or other liablities related to news shared here. We do our best to keep tabs on infringements. If some of your content was shared by accident. Contact us about any infringements right away - CLICK HERE