Jump to content
WraithVerge

THE Idiot's Guide to Kitbashing

Recommended Posts

fairly strong, especially in thicker sheets. you can get it from your local hobby store.

I can't. No one carries it. Got another option?

online, plastruct and evergreen plastics are available.

Thankums, WV!

Share this post


Link to post
Share on other sites
quick paint question: i been using krylon fusion paint for a custom alt, and at first it was going on smooth, but now its going on with a bit of a rough finish (i can hear the difference in the sprays)....is it cause the cans gettin empty, or am i not shaking it enough, or what?

first, check to see if it's gloss or flat (I made the mistake of picking up two mismarked cans myself). Also, you may not have had it shaken enough as you said. Additionally, make sure it's warm enough where you're spraying: moisture and temperature can seriously affect paint application.

im gonna try buying a new can tomorrow, maybe that'll help. i need a better place to spray it though, i hadda vaccuum all the little paint particles that had settled on the floor UNDERNEATH 5 layers of newspaper. lol

Share this post


Link to post
Share on other sites
So should I use flat or gloss paint?

And can I spray Tamiya paint (or any non fusion) paint on Krylon fusion layer?

 

Lastly, should I strip of the paint of an Alt Silverstreak before fusion it white?

 

Note: I didn't bother reading through all the pages :)

okay, one by one;

 

1) flat or gloss depends on whether or not you plan on using water-slide decals. if yes, go with gloss.

 

2)yes. in fact, i use tamiya acrylics about as much as i do the regular ones9which is quite oftern!)

 

3) on fusion, it say for bare plastic, if i remember correctly.

Share this post


Link to post
Share on other sites

A question along the lines of repainting Alts...what kind of paint works best for details?

Share this post


Link to post
Share on other sites

generally, i use acryllic paints myself. they tend to be easier to apply, and you don't have to wait as long for them to dry. a word of caution though; after application, you will want to overspray them with krylon crystal-cote. this will protect them from damage from handling and wear and tear.

Share this post


Link to post
Share on other sites

Okay, this should be simple:

 

if the ball joint is a removeable component, you can try swapping it out with one that is the correct size. However, you may have to modify the part that holds the ball joint to the body in order to fit it correctly.

 

if the above doesn't appeal to you, or that possibility doesn't exist, you can try this method: if the ball joint is too small for the head, you can coat the ball with plastic welder,allow it to harden, then sand and smooth it to the correct diameter. it can be a little tricky, but a good eye and a steady hand will give good results.

 

if it's too large, shaving it down is the option for you: merely sand or scrape the ball down to a more manageable size, then smooth it out. in either case, don't worry about getting it perfectly spherical; as long asd if fits snugly and allows full range of movement, you can get away with it being slightly less than perfect.

 

one thing i do NOT reccomend is resizing the ball-receptacle joint in the head. THAT takes a lot of expertise in carving and engraving, and one slip-up can ruin the entire head.( made that mistake many times myself)

Share this post


Link to post
Share on other sites

okay everyone, BIG announcement for IGTKB:

 

As of late, i've been finding myself answering tons of questions about kitbashing, as well as trying to give out the best advice i can. While I enjoy this thoroughly, it can be a bit much to keep up with, as well as trying to write up new articles to ever-broaden the IGTBK.

 

Therefore, I have taken the step of enlisting the help of additional "editors" for this topic. These are people from TFans who have extensive expertise in the field of kitbashing and scratchbuilding, and whom I am completely confident can answer questions about kitbashing/scratchbuilding issues as well as devise new articles on the topic. Now, this by no means says I am leaving: i will still be writing both advice as well as articles, but i want to make sure that the Kitbash/scratchbuild community out there continues to get the best that the IGTKB can offer for resources.

 

The contributing editors as of right now are:

 

Rodimus VTS

 

Speedbullit

 

Rawhide

 

Dark Lord Prime

 

Black Arachnis

 

If i got any names wrong, forgot someone, or if you wish to be a contributing editor, please pm me (NICELY, remember I am human after all!) and KINDLY let me know I forgot you or included you in wrongly , ect. :lol

 

but with that, I now open up the idiot's guide to the new staff, and invite them to do as I have been doing for a while now: helping everyone out the best way I know how.

 

 

-WraithVerge

Edited by WraithVerge

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Find Transformers on Ebay

  • Posts

    • With the upcoming Walmart exclusives announced, let's take a look at Titans Return Mindwipe & Vorath.  
    • The official MS Toys SNS page pas posted new official images of their adorable Mukudo MS-G01 Peach Girl project. Get a look at this unofficial SD Arcee figure that fully transforms from robot to her Cybertronian vehicle mode. Click Image to Read the Full News Story Now
    • The Tets’ Toys and Shenanigans blog has posted another of their wonderful translations with analysis for the Takara Transformers Generations Select Translated Abominus & The Terrorcons Manga Comic. Check out the translated comic with other comments at their site tetstoys. Click Image to Read the Full News Story Now
    • Flame Toys has posted a new box image of [Furai Model] Bug Bite figure. Check out the box art along with the assembled product images of their Bug Bite exclusive for NYCC and US. Click Image to Read the Full News Story Now
    • Agreed. Let's leave that word in the historical dustbin please.   But I also disagree with the basic argument here ie that this is a stupid controversy. I DO think the current 14 issue is likely a case of an innocent coincidence, but the initial MAGA issue was not. It was an objectively political statement that has no place on a toy. Additionally, there's an extra problem with either being on Jazz; a character whose voice was originated by one of the few black performers to voice a Transformer, and also the first. 14 may have had an innocent origin in this case, but in light of both the previous not-innocent MAGA issue, this being Jazz, AND the fact that the fandom was bound to wonder why a number on a well-loved character was changed (see the endless speculation regarding ER Smokescreen), the result is a very bad look that could have and frankly should have been anticipated by the design team. 
×
×
  • Create New...
Sign Up For The TNI Newsletter And Have The News Delivered To You!


Entertainment News International (ENI) is the #1 popular culture network for adult fans all around the world.
Get the scoop on all the popular comics, games, movies, toys, and more every day!

Contact and Support

Advertising | Submit News | Contact ENI | Privacy Policy

©Entertainment News International - All images, trademarks, logos, video, brands and images used on this website are registered trademarks of their respective companies and owners. All Rights Reserved. Data has been shared for news reporting purposes only. All content sourced by fans, online websites, and or other fan community sources. Entertainment News International is not responsible for reporting errors, inaccuracies, omissions, and or other liablities related to news shared here. We do our best to keep tabs on infringements. If some of your content was shared by accident. Contact us about any infringements right away - CLICK HERE