Jump to content
Sign in to follow this  
Hellscream85

Displays

Recommended Posts

That Metroplex is insane!:love .

 

 

 

You can easily find shelving and brackets at any hardware store. Here's a pic of my closet from years back when I took everything off. Notice the brackets.

 

 

 

 

010.jpg

I did that once and what always ended up happening was the shelves sagging in the middle. The Walmart/Target/Kmart Bookshelves do that too. I tried distributing the weight to see if it helps and it didn't

 

I like these but the prices are nuts:

http://www.displays2go.com/Product.aspx?ID=17316

Edited by Cybcouncil

Share this post


Link to post
Share on other sites

That Metroplex is insane!:love .

 

 

 

You can easily find shelving and brackets at any hardware store. Here's a pic of my closet from years back when I took everything off. Notice the brackets.

 

 

 

 

010.jpg

I did that once and what always ended up happening was the shelves sagging in the middle. The Walmart/Target/Kmart Bookshelves do that too. I tried distributing the weight to see if it helps and it didn't

 

I like these but the prices are nuts:

http://www.displays2go.com/Product.aspx?ID=17316

Just put a bracket in the middle of each shelf. I have the same/similar shelves in my "transformers" room and I have three brackets per shelf. It has never shown any signs of sagging or bending.

Edited by PuertoRiCON

Share this post


Link to post
Share on other sites

That Metroplex is insane!:love .

 

 

 

You can easily find shelving and brackets at any hardware store. Here's a pic of my closet from years back when I took everything off. Notice the brackets.

 

 

 

 

010.jpg

I did that once and what always ended up happening was the shelves sagging in the middle. The Walmart/Target/Kmart Bookshelves do that too. I tried distributing the weight to see if it helps and it didn't

 

I like these but the prices are nuts:

http://www.displays2go.com/Product.aspx?ID=17316

Just put a bracket in the middle of each shelf. I have the same/similar shelves in my "transformers" room and I have three brackets per shelf. It has never shown any signs of sagging or bending.

I tried that too I think it may have been the compressed wood junk I used. I may try actual wood next time. That and it gets hot in Texas.

Share this post


Link to post
Share on other sites

That Metroplex is insane!:love .

 

 

 

You can easily find shelving and brackets at any hardware store. Here's a pic of my closet from years back when I took everything off. Notice the brackets.

 

 

 

 

010.jpg

I did that once and what always ended up happening was the shelves sagging in the middle. The Walmart/Target/Kmart Bookshelves do that too. I tried distributing the weight to see if it helps and it didn't

 

I like these but the prices are nuts:

http://www.displays2go.com/Product.aspx?ID=17316

Just put a bracket in the middle of each shelf. I have the same/similar shelves in my "transformers" room and I have three brackets per shelf. It has never shown any signs of sagging or bending.

I tried that too I think it may have been the compressed wood junk I used. I may try actual wood next time. That and it gets hot in Texas.

Trust me, I live in Florida....it get's to here too!

 

Yeah, now that I think of it and after taking a quick peak, I used real wood boards. Good luck.

Share this post


Link to post
Share on other sites

For wall shelves I sure wouldn't mind finding a lead on some good cheap floating shelves. Targets are expensive, but I found an online return on clearance for $8. It was a pretty large one too. Getting ready for some renovations so I haven't found a home for it yet, but if I could get a bunch more like this one that would be killer!

 

If you haven't seen these, you mount a bracket to the wall with 2 bars that stick out and the shelf slides onto the bars and get locked down by screws under the shelf. You don't see any mounting bracket once it's done but it's very secure.

 

After a little work that's gonna take awhile I plan to lay out my whole collection. Most of it is in storage right now, I just keep cycling stuff in and out due to the limited space. However, I always have hope that I'll eventually have space to display it all.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

  • Find Transformers on Ebay

  • Posts

    • With the upcoming Walmart exclusives announced, let's take a look at Titans Return Mindwipe & Vorath.  
    • The official MS Toys SNS page pas posted new official images of their adorable Mukudo MS-G01 Peach Girl project. Get a look at this unofficial SD Arcee figure that fully transforms from robot to her Cybertronian vehicle mode. Click Image to Read the Full News Story Now
    • The Tets’ Toys and Shenanigans blog has posted another of their wonderful translations with analysis for the Takara Transformers Generations Select Translated Abominus & The Terrorcons Manga Comic. Check out the translated comic with other comments at their site tetstoys. Click Image to Read the Full News Story Now
    • Flame Toys has posted a new box image of [Furai Model] Bug Bite figure. Check out the box art along with the assembled product images of their Bug Bite exclusive for NYCC and US. Click Image to Read the Full News Story Now
    • Agreed. Let's leave that word in the historical dustbin please.   But I also disagree with the basic argument here ie that this is a stupid controversy. I DO think the current 14 issue is likely a case of an innocent coincidence, but the initial MAGA issue was not. It was an objectively political statement that has no place on a toy. Additionally, there's an extra problem with either being on Jazz; a character whose voice was originated by one of the few black performers to voice a Transformer, and also the first. 14 may have had an innocent origin in this case, but in light of both the previous not-innocent MAGA issue, this being Jazz, AND the fact that the fandom was bound to wonder why a number on a well-loved character was changed (see the endless speculation regarding ER Smokescreen), the result is a very bad look that could have and frankly should have been anticipated by the design team. 
×
×
  • Create New...
Sign Up For The TNI Newsletter And Have The News Delivered To You!


Entertainment News International (ENI) is the #1 popular culture network for adult fans all around the world.
Get the scoop on all the popular comics, games, movies, toys, and more every day!

Contact and Support

Advertising | Submit News | Contact ENI | Privacy Policy

©Entertainment News International - All images, trademarks, logos, video, brands and images used on this website are registered trademarks of their respective companies and owners. All Rights Reserved. Data has been shared for news reporting purposes only. All content sourced by fans, online websites, and or other fan community sources. Entertainment News International is not responsible for reporting errors, inaccuracies, omissions, and or other liablities related to news shared here. We do our best to keep tabs on infringements. If some of your content was shared by accident. Contact us about any infringements right away - CLICK HERE