Jump to content

Tutorial: Give TRU reissue Perceptor a semi working missle blaster.


Reluttr

Recommended Posts

This is actually a super simple and super easy to do tutorial. In the end you will have a still non-firing missile launcher... but, it will be able to properly hold the missile, so you can display it in various poses with no problem at all.

 

Supply's:

-Pen Spring "available in most click-y type ink pens"

-Phillips Screw Driver

-Flathead Screw Driver

-Wire cutters

-object that will fit into the launchers hole, such as a toothpick, small screw driver, etc.

 

Begin by disassembling the pen and setting the spring aside.

 

Now disassemble the blaster by first gently twisting and pulling on the orange tip of the blaster until it comes off, then remove the screw. As shown in the picture below.

 

blaster1.jpg

 

Now gently pry the orange trigger off the one side of the blaster. Be sure to not put to much pressure on the part as it might break it. You should end up with whats in the illustration below.

 

blaster2.jpg

 

Now using the wire cutters, cut the spring to about the same size as the one in the above picture. Now insert the spring into the blaster as shown below, do not try to wedge the spring into the grooves just yet, seeing as it will just shoot off before you can put on the other half of the blaster anyways.

 

blaster3.jpg

 

Now sit the other half of the blaster over the spring and other half of the blaster. DO NOT APPLY TO MUCH PRESSURE, now with the two half's gently together, stick a small screw driver, toothpick, or other small object into the blasters hole and gently press the spring into place. You should hear a small click and feel the two half's of the blaster come together.

 

Now all you have to do is push the orange ring back onto the tip of the blaster and put the screw back in place and walah you are done. Your Perceptor missile launcher/blaster is ready to hold missiles! I have attached a image of my missile launcher in action.

 

perceptor1.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
  • Create New...
Sign Up For The TNI Newsletter And Have The News Delivered To You!


Entertainment News International (ENI) is the #1 popular culture network for adult fans all around the world.
Get the scoop on all the popular comics, games, movies, toys, and more every day!

Contact and Support

Advertising | Submit News | Contact ENI | Privacy Policy

©Entertainment News International - All images, trademarks, logos, video, brands and images used on this website are registered trademarks of their respective companies and owners. All Rights Reserved. Data has been shared for news reporting purposes only. All content sourced by fans, online websites, and or other fan community sources. Entertainment News International is not responsible for reporting errors, inaccuracies, omissions, and or other liablities related to news shared here. We do our best to keep tabs on infringements. If some of your content was shared by accident. Contact us about any infringements right away - CLICK HERE